Can the agent withdraw my funds?

No. Fensory holds a scoped key that can sign trades only. It cannot withdraw, transfer or bridge funds. Deposits and withdrawals are transactions you sign yourself in the Fensory app.

What can an AI agent trade on Fensory?

Through the current MCP connection, an AI agent can trade 300+ Hyperliquid crypto spot pairs and 300+ perpetual futures across crypto, US stock futures, commodities, equity indices, currencies and rates. The same Fensory account also gives the user app access to 100+ tokenized US stocks and ETFs, tokenized treasuries and 450+ yield products. Custody varies by instrument.

Which assistants can connect?

Claude, ChatGPT, Hermes, OpenClaw, Codex and Cursor, or any other MCP client. Setup is the same three steps in each: open an account, paste the endpoint, set your ceiling.

Can I use Fensory without enabling trading?

Yes. Market data and account reads work with just a Fensory account. Trading tools activate only once you enable agentic trading and set your limits in the app.

What does Fensory charge?

Connecting is free: no account fee and no subscription. A Fensory builder fee between 0.01% and 0.05% applies to perpetual futures and Hyperliquid spot. There is no Fensory fee on tokenized equities, yields or bridging. Exchange maker and taker fees, network fees, issuer or venue spreads and the card on-ramp fee apply on top and are shown before you pay.

Fensory AG is based in Switzerland. The service is not available to US persons, and eligibility is enforced at the access layer.

The MCP server that gives your assistant a trading account

Fensory is a non-custodial trading MCP server, run from Switzerland and not available to US persons. One endpoint connects Claude, ChatGPT, Hermes, OpenClaw and any MCP-compatible assistant to 300+ Hyperliquid spot pairs and 300+ perpetual futures across crypto, stock futures, commodities, indices, currencies and rates. The same Fensory account also gives you app access to 100+ tokenized US stocks and ETFs and 450+ yield products. You set the ceiling and market list for agent trading. It can trade. It can never withdraw.

Perpetual futures are leveraged products. A position can be liquidated and can lose more than the margin committed.

https://mcp.fensory.com/mcp

Open the app Connect in three steps

What your assistant does with it

You write the instruction. It picks the markets, sizes the order against your ceiling and reports back. Every one of these works today. Copy any of them into your assistant once it is connected.

Show me the Apple perpetual future and its current funding rate.
Equities
List the US stock futures I can trade and their maximum leverage.
Equities
Schedule a Nvidia perpetual-futures order using TWAP.
Equities
List my spot balances and open perpetual-futures positions separately.
Portfolio
Compare UBTC spot with the BTC perpetual future before I decide.
Compare instruments
Buy $200 of UBTC spot. Do not open the BTC perpetual future.
Spot
What did I pay in venue and Fensory fees this week?
Portfolio
Show me the gold perpetual future, its funding rate and my account limits.
Commodities
Sell my Solana if it drops 8% from here.
Standing rule
Show me the funding rate on BTC perps before I decide.
Perps data
Which perps have the highest funding right now? Has it been consistent this week?
Perps data
Short BTC 2x with a stop at $58,000.
Perps
Long 0.01 BTC at market with a stop at 58,000 and a take-profit at 66,000.
Perps
Close half my ETH perp long and leave the freed margin in USDC.
Perps
What did you trade for me this week, and what did it cost?
Portfolio
Or ask for something else
These are examples, not a menu. Say what you actually want, in your own words. The ceiling and the market list hold either way.
See every market

Why an assistant needs its own account

Broker and exchange APIs were built for a person clicking buttons. They hold your assets, cover one venue, and expect a human to approve each action. An assistant working inside them has to be trusted rather than bounded.

One connection for spot and futures

The MCP connection reaches Hyperliquid spot and perpetual futures across crypto, stock futures, commodities, indices, currencies and rates.

No private key in the assistant

Your assistant never sees a key. On the current MCP path, Fensory uses a scoped Hyperliquid signing key that can place trades and cannot withdraw, transfer or bridge funds.

Markets that stay open

Hyperliquid spot and perpetual futures trade continuously, so an assistant can monitor and act outside the New York session when the account permits it.

Limits are enforced on the account, not in the prompt

A limit written into a prompt is a request. Every order placed through Fensory passes the backend first, where the controls you set decide whether it is allowed to exist.

Kill-switch: Disable agentic trading and every trading tool starts failing immediately.
Allow-list: The assistant trades only the markets you have approved. Perps and spot are authorised separately.
Per-order cap: A hard ceiling on the size of any single order, checked before the order reaches a venue.
Withdrawals: Not possible for the assistant, at all. Deposits and withdrawals are transactions you sign yourself in the app.

Connect in three steps

About 90 seconds to an account, about the same to connect it. There is nothing to install and no broker approval to wait for.

01
Open an account
Account and wallet are created together at app.fensory.com. About 90 seconds.
02
Paste one URL
Add the endpoint above as a connector in Claude, ChatGPT, Hermes, OpenClaw, Codex and Cursor, or any other MCP client. Sign in once when it asks, and the session stays.
03
Set the ceiling, then talk
Choose which markets it may trade and the most it may spend on one order. After that, trading is as long as typing.

Start in the app

What your assistant can trade through MCP

300+ Hyperliquid spot pairs and 300+ perpetual futures, with separate permissions for each. Tokenized assets and yield products remain available in the app.

Crypto spot Perpetual futures Every market in the app

35 tools, in four groups

Market-data and account reads do not place orders. Trading tools can place real orders inside the controls set on the account. Use your client’s confirmation mode when you want approval before execution.

Account

Positions, resting orders, fills, funding payments, portfolio history and your real fee rates.

get_perps_status
get_account_state
get_open_orders
get_fills

Market data

Prices, order books, candles, recent trades, funding history and predicted funding. Stock and commodity futures resolve by ticker, so TSLA, NVDA and GOLD work the way a trader would type them.

get_market
get_all_markets
get_orderbook
get_predicted_fundings

Perpetual futures

Market, limit and stop orders with take-profit and stop-loss attached, position close, leverage and margin, and TWAP schedules.

place_perps_order
close_perps_position
set_perps_leverage
place_twap_order

Spot

Outright buys and sells with no leverage, cancellation and spot TWAP.

place_hl_spot_order
cancel_hl_spot_order
place_hl_spot_twap_order

Fees and limits

Fensory fee: 0.01% and 0.05% on perpetual futures and Hyperliquid spot. None on tokenized equities, yields or bridging.
Venue fees: Exchange maker and taker rates, plus issuer or venue spreads and network fees.
Minimum order: $10, or $100 for a TWAP.
Funding: Charged hourly on open perpetual futures positions.
Slippage: Market orders fill near the current price, within a 5% allowance.
Key lifetime: The agent trading key lasts 180 days, then you re-approve it in the app.

Questions people ask

Can an AI agent trade real money through MCP?: Yes. The Fensory MCP server gives Claude, ChatGPT, Hermes, OpenClaw or any MCP client a live trading connection for crypto spot and perpetual futures across crypto, stock futures, commodities, indices, currencies and rates. What it can do is bounded by limits you set in the app: a kill-switch, an access expiry, a market allow-list and a per-order cap.
Can the agent withdraw my funds?: No. Fensory holds a scoped key that can sign trades only. It cannot withdraw, transfer or bridge funds. Deposits and withdrawals are transactions you sign yourself in the Fensory app.
What can an AI agent trade on Fensory?: Through the current MCP connection, an AI agent can trade 300+ Hyperliquid crypto spot pairs and 300+ perpetual futures across crypto, US stock futures, commodities, equity indices, currencies and rates. The same Fensory account also gives the user app access to 100+ tokenized US stocks and ETFs, tokenized treasuries and 450+ yield products. Custody varies by instrument.
Which assistants can connect?: Claude, ChatGPT, Hermes, OpenClaw, Codex and Cursor, or any other MCP client. Setup is the same three steps in each: open an account, paste the endpoint, set your ceiling.
Can I use Fensory without enabling trading?: Yes. Market data and account reads work with just a Fensory account. Trading tools activate only once you enable agentic trading and set your limits in the app.
What does Fensory charge?: Connecting is free: no account fee and no subscription. A Fensory builder fee between 0.01% and 0.05% applies to perpetual futures and Hyperliquid spot. There is no Fensory fee on tokenized equities, yields or bridging. Exchange maker and taker fees, network fees, issuer or venue spreads and the card on-ramp fee apply on top and are shown before you pay.
Who can use Fensory?: Fensory AG is based in Switzerland. The service is not available to US persons, and eligibility is enforced at the access layer.